Originally Posted by
tc5 man
I have the Black Front Spring , 32w/1.3 and Rear Pink springs / 30w/1.3 . Im going to get the Green Springs . I did notice that the Pink Springs on the Rear must be a little to soft. Because on the bottom of the arms its ingraveing into them but the truck is not bottoming out the Front alum outer suspension block also. I did however use some middle hole pills on the inner block for more Anti squat .
I do have the ride height even Front and Rear its low enough for indoor but than again with the body on it may be lower. I was thinking about the HD saver spring with that very high torque servo it could be better.
Pink springs are too soft unless your running fiorini pistons IMO. Tekno pistons, green springs.
For the regular servo saver spring run it tighter than the HD... maybe 10mm? Or get the HD one.