Originally Posted by
wallride14
Hey guys, I've recently purchased and built both the EB48.2 and NB48. I after finishing the builds I noticed that the "box setup" of the two buggies are very different and that has me a bit confused since they are virtually the same buggy. I mean, almost every setting is very different from the camber link lengths, camber link locations, bump steer settings, shock locations, rear toe, anti squat and ride height. I guess im just wondering why this is, and if the NB48's setup is the most recent and I should run that on both cars? Thanks
You will find that to be the case on most manufactures cars. The nitro / electric setups seem to be different.
I don't want to make assumptions for the different setups because I have no inside privy information.. But I assume that the weight balance is different between the 2 cars. The NB48 is wider. The chassis braces and chassis its self is very different.
With that said, just Driving a nitro car and a electric car is VERY different and can require a different setup.