Originally Posted by
Stealth_RT
You probably won't like the Fiorini pistons. At least, you won't see the big benefits from the dual action. The Fiorini's are, IIRC, 15.8mm in diameter or so. The Serpent shock bodies are more like 16.1mm bore. I think they are just a bit too big in diameter for the Fiorini piston O-rings to grab and 'drag' again the shock body and provide the intended resistance on compression.
They fit better then .3mm would indicate, but will see. I was running the CSI's before and can switch back pretty easily.
Originally Posted by
bigwavedave33
that's a crap load of camber in the rear! Thanks!
I am pretty sure I said something similar to Chicky a while back in this thread. He said it worked.
