Thanks for the info.
So the batterys are in series?
I have a few issues in the dozen times running the truck stock.
Lost a couple of the rear knuckle bearings(6x12)
Why wouldnt they go with 8mm axles and 8x16 bearings?
Hinge pins are soft, bend easily and bind arms.
The last jump I did was small, 4 ft high 6 ft long of air. Landed flat off power. Broke a shock cap, and pulled the lower hinge pin out of the gear case.
Broke the hinge pin off at the threads.
And that was while landing in 3 inches of snow. Only thing I can think of was snow packed in the arms and maybe bound the suspension on landing.