R/C Tech Forums - View Single Post - Gearing
Thread: Gearing
View Single Post
Old 02-16-2014 | 05:01 PM
  #3  
kiwiazbro's Avatar
kiwiazbro
Tech Regular
iTrader: (2)
 
Joined: Jan 2014
Posts: 274
From: Melbourne
Default

Originally Posted by Dave H
A 21.5? What speed control are you using? Is it in no timing 'blinky' mode, or something with boost?

That's likely going to need a huge pinion, especially if blinky, with the smallest spur they make. For reference the 17.5 blinky guys are typically using 30 to 35 tooth pinions with the smallest spur (69-70 tooth or so). A 21.5 likely needs a larger pinion than that. Some speculation on my part though, never tried a 21.5.

Even then I suspect it would be down on power, offroad typically starts with 17.5. 21.5 is only an on road thing, maybe oval, to the best of my knowledge. Depending on the brand of motor you might be able to just swap to a different wind stator, otherwise suggest getting a different motor.
Sorry I'm not sure what blinky is. My ESC is a Hobbywing EZRUN-60A.
I'm not sure what you mean by 'no timing 'blinky' mode, or something with boost?'. I'm really am an absolute beginner.

My offroad club runs a 21.5 class and the motor is approved for competing offroad so I don't have plans to change the motor.
kiwiazbro is offline