R/C Tech Forums - View Single Post - Tekno NB48
Thread: Tekno NB48
View Single Post
Old 02-16-2014 | 01:29 AM
  #737  
DBL15's Avatar
DBL15
Tech Elite
iTrader: (8)
 
Joined: Dec 2010
Posts: 3,171
From: Gold Coast
Default

Originally Posted by BigInJapan
Here's another photo whole car, I understand your point about the heat, but my tanks have cracked in different places every time. Yes the overflow tube has been halved. We have big triples here that's whT I suspect, but I'm also running my xray truggy today, no problems
Ok to start with you don't need to run that low at all. I have never rolled over and I run 28mm ride height

Ok back to tank 1mm is no where near enough play.

Use 10mm piece of fuel tube as a cushion and a longer tank screws your tank needs to move a lot mate

I now have well over 4L on this tank running weekly with no problems at all.

Put the longer screw through the drilled out tank holder hole and then 10mm fuel tube and screw it down to just touch the fuel tube and leave it there it will be loose and fine

But yes Danny and Tekno are working with us team guys as we speak
DBL15 is offline