Originally Posted by
tc5 man
Have you guys had issues bleeding the shocks with the plastic caps Emoulsion style i have plently of oil in them and the holes in the cap look like there cleared but no oil coming out ? Im using the Xray pistons if that matters.
I tried to put the cap screw in and went up and down on the shaft and it seems fine smooth and has a little rebound.
I thought about this and if you are still running 4 limiting orings with the new lower shock caps... that's why they are not bleeding any oil out the bleed hole.
The shaft is not allowed to push in far enough to disperse the oil out the cap.
Remove at least two orings to get down to the max suggested limiting and they should bleed correctly... better, run zero orings.