Originally posted by Swayze
Question - Last night at the track my car was starting to have some problems. About half way through the last race my car became very loose in one direction, and it pushed in the other. Afterwards, I ripped the car down to see nothing changed. The Bearings are spinning free, the tubes are fine, the springs are fine, the screws are tight, the tires are glued, I'm not rubbing, nothings binding up... so I'm pretty much lost! Has anyone had this problem with a REV3? If so, could you give me some tips??? Thanks.
I have had this happen before. It was caused by the batteries moving over to one side and resting on the side link. This unbalanced the car to one side, causing major tweak of the chassis. And the O-Ring didn't come off, either.