Originally Posted by skrichter

For those that can't make out the picture:
Front
Toe:0
Ride Height: 24mm
Camber: -1
Caster: 5deg
Kick: 25deg
Oil:35???
Piston: 4x55
Spring: LF Red
Pivot: Alum
Kick: Plastic
Limiters: 3mm
Shock Location: 2-Outside
Bump: STD
Camber Link: 2-A -- don't know if this is inside or outside??
Ball Stud spacers: 0 inner, 2mm outer??
Caster block: Middle

Rear
Toe: 3deg
Antisquat: 2deg
Low Roll
Ride Height: 24mm
Camber: -1
Rear hub: Middle
Hex: STD
Oil: 27.5
Piston: 4x55
Spring: LF Grey
Shock Limiters: 0-unscrew end 3 turns, O-ring on shaft to limit uptravel
Camber Link: 1-B ???
Ball Stud spacers: 0 inner, 1.5mm on hub
Shock Loc: 2-Inside

Weight: 7g on tranny
ESC on battery shelf

Dakotah needs to confirm the items in Bold.