Originally Posted by
AlanHall
I was thinking about trying the new speed passion blaze 5700kv in my truck. any advice on gearing compared to the 4pole setups?
and wanted to say whats up to everyone else in the thread. I have 2 scte/mip trucks on the way. hopefully they work out and I can hang out around here a while
Honestly Im not to sure where you would want to start with that. It is quite a bit higher Kv compared to my 4.5T Thunder Power and I am generally geared at a 12-13T. For that I would have to imagine you would want to go even smaller. My best advice would be to pick a different motor. But if you were set on this motor I would start with a 10T and check temps. If it seems slow on top and temps are cool go up one tooth until you feel it is fast enough and temps are in check. Or if it gets to hot go down a tooth.