R/C Tech Forums - View Single Post - TAMIYA M-06 Thread
View Single Post
Old 01-24-2014 | 05:50 AM
  #1453  
OVA's Avatar
OVA
Tech Lord
iTrader: (91)
 
Joined: Dec 2002
Posts: 10,514
From: WASHINGTON
Default

Originally Posted by fritzthecat
i will have a look.

thank you!

tomorrow I will start to build my M06.

in february I go for a testday with both M05 and M06 to find a good setup.

This is Aitukaki set up

Hy guys,

some update on my personal carpet setup.

last weekend , 1st carpet TCS was held in our local Series.
M-Chassis was the class with most entries

The Carpet had a very high grip level , and only non-oil additives were allowed. ( SXT 3.0, Mighty Gripper V3...)
After struggling the whole training day and the first two Qulifiying Heats for finding the right setup (i had so much understeering) , following setup made me smile

M-06R :
Front:
Type A (glued on the side)
SXT 3.0 Additive on the inner side of the Tire (for 20 minutes)
tires not heated
300 oil
blue springs
no sway bar

Rear:
Gear Diff
S-Grip (full Additive for 30 minutes)
400 oil
Red Springs
no sway bar
carbon Damper Stay - dampers on the outest position (straight up)
AND:
Red HUBS mounted reverse !!! Left on the right side and right on the left side- for nearly 0 degree on the rear.

And guys believe me, that was really awesome.
fastest lap times and fastest heat.

finally ended up in 2nd position, because i lost a tire in the finals *g* because it was not tightened strong enough -> i feel ashamed , because i was in first position with about 6-7 seconds ahead of the second one...

nevertheless i was that happy, because i knew the car is so fantastic , as long as the setup works fine...

maybe this may help one of you
OVA is offline