Originally Posted by John Tag

Few things..

First NO droop...? That's not a great thing with a TC... avg cars work best with 1-1/2 to 3mm front droop and 2-4mm rear droop over ride height. I personally run 1.5-2.5 front and 2-3 rear depending on tracks. Those droop settings are droop over ride height (Up travel). There are many top drivers now even playing with more higher droop.

Yes like said..Make sure wheel's you are using are equal..Like set up wheels or a new pair of tires. A used set of tires for set up can give unbalanced #s as tires are not always same size once ran a few times even thou them may look or measure the same.

Also, Try and loosen up 2 screws on top servo mount post and reset those.(I personally don't run those 2 screws on top servo brace that connect to steering post)

Also on rear behind motor..Loosen those 2 screws on center pully mount left side there and re-tighten as it could be holding a tweak there is you had any hits.