Originally Posted by
uscgretired
I did a data reset which puts the ESC back to factory defaults for throttle profile number 1. Are you thinking I should raise or lower the settings for Dead Band and Minimum Drive? The radio has traction control but it is off, I have never tried the feature.
Thanks,
Bill
I was thinking you should change the profile settings and ignore the "factory default" settings.
that's the only idea I can come up with. unless you have a defective esc I think it's a radio or esc setting causing the issue.
I have tried different dead band settings and it resulted in no throttle at all. so I immediately thought that could be your issue. I also thought of maybe your sensor wire is bad if you are using one.
just throwing some ideas out there.