R/C Tech Forums - View Single Post - CRC Altered Ego set-ups
View Single Post
Old 01-13-2014, 02:39 PM
  #27  
tim fry
Tech Addict
iTrader: (1)
 
tim fry's Avatar
 
Join Date: Aug 2004
Location: Kent UK
Posts: 606
Trader Rating: 1 (100%+)
Default

Originally Posted by dyoung
sg1,
Ran the altered ego for the first time this weekend and having a traction roll issue. Carpet is extremely high traction ozite and had the following setup:
front
black tires cut to 1.62" SXT compound 1/5th inner then nothing
.45 springs
-.5 camber
caster all the way forward
30k lube on kingpin
3mm ride height
rear
white side springs just touching
30k lube in dampers
gold center spring/35wt oil
blue tires cut 1.68" full SXT
3mm ride height
battery rear
Mohawk body
Had the chassis low enough that it drug the front, and turned the dual rate on transmitter down so much it became hard to get through chicanes etc. but that was the only way to stop the traction rolling.

Open for ideas.
Thx
Cant see much wrong there but I would try .50 front springs and gold centre spring does seem a little stiff giving lots of steering.
tim fry is offline