For those interested ,After finishing the Vision Pro there are a lots of good bits on it like the front a/roll bar a grub screw to in/decease stiffness so only one roll bar is on the car with out carring more.The shocks has a new pistion set up not the sandwhich o ring type,But has 2 pistions with diffirent hole settings push up 4 clicks which is max and your done!Allmost double the shock oil thickness seems to work well,No worries about motors fitting in as there are taped collers and pilot shafts to suit any motor,sg or standed,As in raceing Lines they had trouble with the Collari they fixed that so in it go's for the power plant.And the pivot ball suspension gives you clips so ajusting camber and toe in rear is easy, use the clips and you won't get it wrong No more set up caddies,Very good car its going to be good to see how well they will stand with the rest,My ob4 can do it. this car will make things easier