Originally Posted by Justin33

Just wondering about some setup help for my xray t3 2012 in vta. My issue is it runs great for the first 3 minutes then gets really tight almost like the rear is gripping too much and causing it to not rotate at all after 3 minutes my lap times go down from 8.1-8.3's to like 8.8-9.0's we run 6 minutes heats so 1/2 second per lap equals about 8-9 seconds or a whole lap on our track. Which kinda sucks because i'm just as fast as anyone else for the first 3 minutes then just fall off and barely hold on to 2 or 3 spot.

So my main question is where should i start to stop this? Our track is medium grip carpet. Should i start with roll centres or sway bars or shocks oil,springs, shock angle? My setup is pretty basic 3.0 front springs 2.6 rear with 35wt shock oil 1.2 rear bar 1.4 front bar. Lower arm roll centres are at 0 2000wt rear gear diff front solid axle medium chassis flex shock angles pretty much in the middle stock camber links and spacers.

Any idea where to start would be awesome thanks guys