R/C Tech Forums - View Single Post - Nitro On-Road
Thread: Nitro On-Road
View Single Post
Old 01-01-2005 | 01:03 AM
  #2228  
doki_doki's Avatar
doki_doki
Tech Elite
iTrader: (2)
 
Joined: Dec 2003
Posts: 3,840
From: Cebu City, Philippines and Ocala, Florida, USA
Default Re: engine problem...

Originally posted by judd
guys ang hirap nang i start ung engine ko (gs15r) to the point na lumalaki na ung biceps ko ayaw pa din mag start... nu kaya problem nyan?? minsan ayaw pa bumalik ung pull start.. gagalawin ko pa ng konti ung flywheel para bumalik... hrrrr.. nu kaya problem?? if ever how much ba mag pa tune up ng engine??? salamat!
pare...looks like parang malapit na masira yung pull starter nang engine mo. don't pull too hard sa pill start mo pare baka ma sira yan. ok yung advise ni it na around 2 feet lang extension an pull starter cord mo. if properly tuned yung engine mo, even one pull is enough to start your engine. you can also check the needle settings. for the high end needel, you can start at2 to 3 turns out from the closed position. sa low end, 2.5 to 3 turns out from the closed position. also, try to set your idle needle that around 3-5mm opening sa card mo at idle position...
doki_doki is offline