Originally Posted by
yunowill
Hey guys Im having a little bit of an issue here . I just finished the build on my B44.2 and Im having some setup issues . I have built the car using this setup for my local track as it is what I feel that best suits my track conditions.
http://www.petitrc.com/setup/associa...und2013041314/
* However the kit say to use the 5mm offset spring cup with the build . However I can't seem to achieve the 18mm ride height that is stated in the setup sheet I am going off of . Not sure if I should use the 0mm offset spring cup or the smallest out of the three that are included in the kit . Right now I got the middle size (5mm offset cups installed). I have my shocks eyelets bottoms out or screwed all the way in on the shock shafts I have set my toe,camber and everything else and double checked all my shims and shock hole locations .
So Im not to sure how to get the lower right height out of this buggy .
Any help would be great
Thanks in advance
Will,
Do you have the shock spring collars all the way up? That is how you set the ride height. If they are topped out then try the 0mm spring cup, but you should be able to lower it using the collars. With the 0mm spring cups I can get the buggy to about 8mm ride height with a couple turns on the collars for a carpet track with no jumps.