Hey guys Im having a little bit of an issue here . I just finished the build on my B44.2 and Im having some setup issues . I have built the car using this setup for my local track as it is what I feel that best suits my track conditions.
http://www.petitrc.com/setup/associa...und2013041314/


* However the kit say to use the 5mm offset spring cup with the build . However I can't seem to achieve the 18mm ride height that is stated in the setup sheet I am going off of . Not sure if I should use the 0mm offset spring cup or the smallest out of the three that are included in the kit . Right now I got the middle size (5mm offset cups installed). I have my shocks eyelets bottoms out or screwed all the way in on the shock shafts I have set my toe,camber and everything else and double checked all my shims and shock hole locations .

So Im not to sure how to get the lower right height out of this buggy .

Any help would be great

Thanks in advance
Will,