View Single Post
Old 01-04-2014, 08:33 AM
Tech Fanatic
Geberit's Avatar
Join Date: May 2009
Posts: 769

Originally Posted by JimmyMac View Post
You can reshim it with 0.1mm shim on each side instead of 0.3mm shim and/or sand down the backs of each gear with 400 grit sand paper. Also be sure that the outdrives turn freely when they are pinned in place before you screw the diff together. Is the seal/gasket in place? Just some things to check.
I sand down the gears a bit and now it runs freely

Geberit is offline  
Reply With Quote