Originally Posted by
bertrandsv87
You forgot to change the esc's minimum drive to max settings, and sometimes you have to physically move the esc in the Car away from carbon fiber, and double the stick tape that holds the esc down, while spacing all your electronics away from each other...
how could the minimum drive affect it? my GTB 2 has the same minimum drive as my pulse. I ran the same set up on GTB 2 and it doesnt cog like that, it doesnt cog at all. the issue was only in the Pulse. All the ESC settings in which they share are the same.
My esc is in the tray behind the battery but I have a toe block separating them so its not touching the battery. and the receiver is in the side pod.