Originally posted by Galifrey
Hey Fraz
thanks for that advice, will give it a try, do you just shim the front block of the rear as well? Whats the one way mod?
Yes, I meant running a modified motor with a oneway. Sorry for the poor English
I put .8mm shims under the front block at the front suspension to give a little kickup. It helps the initial steering and feels better through the corners. In the back I have a total of 8 .8mm shims under the front and rear blocks (2 at each screw) for a total of 1.6mm. If you do this, make sure you take out the 2mm inner camber link spacer.