R/C Tech Forums - View Single Post - Help with esc/motor compatibility
Thread: Help with esc/motor compatibility
View Single Post
Old 12-10-2013 | 06:51 AM
  #5  
lbenton's Avatar
lbenton
Tech Elite
iTrader: (48)
 
Joined: Aug 2012
Posts: 2,127
From: Fort Worth Tx
Default
Originally Posted by Upbasher
Ok so basically the more amps the esc has the bigger/heavier vehicle you can put it in?
Is this a good combo for a artattack snowmobile? I will also probably be using it for some light bashing in my hyper 7.
http://hobbyking.com/hobbyking/store...000KV_80A.html

I would not use that in a Hyper 7, that is a 1:8 buggy... I would suggest as a package looking at the 150a ESC and some 1:8 friendly motor less than 2000KV and running it on 4S.

In the end you will spend less if you get something that will last, and your Hyper 7 is a little too much buggy for that.
Last edited by lbenton; 12-10-2013 at 11:34 AM.
lbenton is offline  
Reply