Originally Posted by
John Wallace2
Me too 4 is better than 3. From your handle I assume you have a lot of experience racing on carpet. Whatever you would do on carpet (especially if you ran touring car) to fix the tire lifting problem should work with your buggy. What sway bars are you using and make sure the droop is the same on both sides of the rear (also check the front droop too).
The sway bar is picking the inside tire up. Before you mess with trying to change the rear roll
stiffness make sure you cant move the endlinks up or down the bar a little to try and take it
out of such a bind. Your asking for an awful lot of travel from them on a 1/8 scale and they
will bind up at full droop/compression.