R/C Tech Forums - View Single Post - Richfield Racing!
View Single Post
Old 06-10-2002, 06:45 AM
  #20  
simulatedwood
Tech Regular
iTrader: (7)
 
Join Date: Aug 2001
Location: Cottage Grove, Minnesota
Posts: 327
Trader Rating: 7 (100%+)
Default James, It is an open class

By definition it is an open class... Ie you can run Rubber or Foam ..Mod or Stock.. 6 cell or 7 cell .. 3 tires or 4 tires. It does not matter! It is open..meaning you decide what your going to run. I cannot help ya decide what your running, that is your chioce. If you have a problem with the class structure you dont have to race with us, but u will be missing out.

Now after week 2 of racing, we now have a drivers stand, frequency clip board, and timer. The straight was a good 150 feet long with one high speed chicane and several low speed technical sections. 5 minute qualifiers were completed in around the low 20 lap numbers. The surface was swept, blown, sugar watered, and billard table smooth. There is even some talk of the 12 scalers thinking about running here bacause of the conditions of the surface. Racing started a 2:30, with three heats of racing (15 racers) we were done around 5:30. If you are up for some Sunday racing and like being outside. I urge the racing crowd to come on down and try there skills against a fairly large track and competitive track.
SWG out!
simulatedwood is offline