Originally Posted by
VBC Racing Shop
Personally, I only sand the edges of the chassis until they are smooth. I do not seal anything.
As far as the shock towers
I experienced de-lamination before, so I do only the bottom plate. It's an age old debate
Originally Posted by
Charel
Just a Q, when you prep the CF you obviously do the chassis plate and shock towers, but does one also do the top deck or will that interfere with the flex?
Thanx guys.
I don't bother with the shock towers, but I sand all the edges. Especially sand the edges where the battery tape goes through(if you strap it) or it will cut it. Don't CA the upper deck.