R/C Tech Forums - View Single Post - Hobbyking 120a Programming Card Problem
Thread: Hobbyking 120a Programming Card Problem
View Single Post
Old 12-05-2013 | 07:18 AM
  #4  
mkiiina's Avatar
mkiiina
Tech Elite
iTrader: (71)
 
Joined: Jul 2007
Posts: 2,415
From: Frisco TX
Default
Originally Posted by dropkinn
Hi everyone, I recently purchased two of these: http://hobbyking.com/hobbyking/store...nsorless_.html but I cant get this programming card http://hobbyking.com/hobbyking/store...150A_ESC_.html to work. When I plug it in the red led at the top lights up, but no numbers display on screen. Thanks for the help, Dropkinn.
I use that card with the smaller 45 and 100amp esc's without issue. I know it sounds dumb but try flipping your rx wire over and see if that works. The other item of note is check what port you have it plugged into on the card. 1 is just for power and the other actually is used to talk to the esc.

Good luck.
mkiiina is offline  
Reply