R/C Tech Forums - View Single Post - Tamiya TB-Evolution IV
View Single Post
Old 12-24-2004 | 04:03 PM
  #2222  
JimmyMac's Avatar
JimmyMac
Tech Elite
iTrader: (2)
 
Joined: Oct 2001
Posts: 4,445
From: NC
Default

I used either AE yellow or AE purple springs up front and AE copper in the rear. With AE 70wt up front and AE 50wt rear.

I also used 415 suspension blocks all around the whole car since they sit the suspension down lower. I think the blocks were C or B/A front and A/A rear.

Short wheelbase for more car rotation. I can't remember if I had 4degree blocks on the car too. That's all I could remember off the top of my head.
JimmyMac is offline