Originally Posted by
docsitz
Does anyone have any tips for 1/12 pancar setup
-Cut your rear tires no larger then 44
-Make sure your pod is free and doesn't bind up
-Your diff is smooth and tight but not to much
-Your front droop is the same and not more then .5-1mm
-Your ball bearings aren't crunchy
-You damper tubes are smooth and lubed with something thicker then black grease
-You have a proper radius on your tires. This is a BIG deal
-You have your rear pod droop at 1-1.5mm
-Car is de tweaked on a tweak station
There's more but thats a good start!