Originally Posted by
geeunit1014
If you are running the same #s on the different firmware, that could be your issue. The settings are different between the different firmwares, so you will need to change the #s to get the same settings. Also, especially if you are on stock ramps for your 13.5, V3.3 may not have the same activation and ramp rates for spec motors, it may only be for mod, I know V4.0 is like that.
Thank you for the tips! :-) I tried different ramps with my 13.5 and I still had to run a lot of boost to achieve the speed and power I was looking for with v3.3. So I reinstalled the older software. With my 6.5 the power delivery was smoother with the software but I had to run boost with a 6.5 to achieve the power with the older version as well. With the boost turned on it of course raised my temp and I don't want to harm my speedo and or motor so I went back to the older software that achieve a the same thing v3.3 does with boost and lower tempo with older SW. I definitely feel that these speed controls are the best on the market hands down. Keep up the awesome work LRP!