Originally Posted by Max K

Hi Kody!

Its basically the same as my 13.5 setup...

5 degree caster block setting
thick shim back, thin shim forward
6 degree caster (measured with the Slapmaster caster gauge)
no brace
stock length upper arm
stock lower arm width
AE .20 front spring
High position on shock mount
2mm shim under rear shock
35wt oil in center shock
AE blue spring
Side Springs in standard position on pod
AE silver side spring
Half turn preload
10K in the tubes
max rear width (172mm)
Pink front
Pink rear
Protoform AMR