Originally Posted by
Eastside777
Guys some were on this thread I thought I read something about X-ray arms will fit the BR6 .which arms fit this car ? I changed my front lower a arms twice not for crashes but they tend to bow up . Just tryna find away around the bowing arms , car runs great nothing ever breaks .
Also looking for a new set up to try . I have always ran the car
5/5/5 f/m/r
Shocks outside hole on arms front / back
Middle hole on front shock tower
Front A arms in middle position
Back A arms shims in the front
Rear camber link lower hole on tower
Outside hole on hub
Using jq springs soft up front and mediums in back .
Any ideas out there for me to try?
i run 5-4-4 in my diffs, also i use cf arm stiffners to keep the arms from bending so fast and i also like them for handling. If you havnt yet you should try the vp pro progressive springs, i use pink fronts and red or orange rears depending on track. I also use rear shock shafts in the front shocks with a 3mm uptravel limiter. For shock location i use inside on front arms and outside on rear arms and upper top location on both towers. Lmk if you would like any more detail on anything.