When i get the parts probably tomarrow i am going to pay more attention when i put it back together. I was fairly certain my droop settings prevented the shock from hitting the bottom of the body. I will need to verify it can't hit the webbed bladder as hard either. Infact i may do what i had to do in my old losi cartridge shocks and put old O-rings on the bottom of the shaft both inside and outside just to be safe. That prevented those stupid losi cartidges from exploding off the bigs jumps, and should prevent the shocks from hitting hard when parts flex and it over extends the droop settings.

Those o-rings shouldn't be enough to change shock limiting with the droop settings. I will have to verify to be sure and post it up.