R/C Tech Forums - View Single Post - 1/12 RS12G Atsushi Hara Replica
View Single Post
Old 12-18-2004, 12:17 PM
  #257  
Crashby
Tech Fanatic
 
Join Date: Apr 2004
Location: SF Bay Area
Posts: 814
Default

Originally posted by Asurada Sugo
I want to build a 1/12 chassis from the ground up with the AH12 conversion kit. Can anybody give me a hand as to what parts I would need to purchase in order to have the car complete? I don't have a 1/12 so I'm going to have to buy all the parts separately.

Here's what I gathered I'd need:

AH12 conversion kit
IRS rear shaft + diff assembly kit
rear motor mount (left and right)
rear ride height adjustment blocks
rear shock
the whole front suspension assembly
bearings
screws
shims
gears
tires
body

Here's a few I'm not sure about:
- The two alum posts that holds the middle graphite piece where the rear body mount bolts on to.
- The alum post that holds the friction plate


What else am I missing out?
Any help would be greatly appreciated!!
All of the parts you will need are available from the Associated web site and the parts are very reasonable.

Just go to www.teamassociated.com.

Click on: Parts & Asscessories
Click on: On Road & Oval Parts
Go to either the RC12L3 or RC12L4 string.
Click on: the PDF file. (you must have Adobe to read this file. You can down load it for free right from the Associated website)
After opening the PDF file, write down all of the part numbers with descriptions and quantities you need.
Close the PDF file.
Click on: The catalog for either the RC12L3 or RC12L4
Click on: The "Click here to order button"
Complete the billing and ship to information and at the bottom of the same form you will see fields to put in part number, descriptions and quantities. Then just complete your order and you will have your parts. Sorry for the long instructions but... website is not user friendly.
Crashby is offline