IndyRC_Racer

iTrader: (9)

Here is a detailed list of the Tamiya F201 car & parts that I have.

Tamiya F201 assembled chassis (no servo, no speed control, no receiver, brushed 27t motor w/pinion)
Here is a list of upgrades installed on the car (all parts are Tamiya unless noted)
- Reinforced lower a-arms, front & rear
- Aluminum dampener swing arms to connect shocks to a-arms(Tamiya on front/aftermarket brand on rear)
- Aluminum chassis brace by motor (replaces stock plastic)
- Aluminum motor mount (replaces stock plastic)
- Reinforced prop shafts (front/rear)
- Aluminum wheel hexes (replaces stock)
- Tamiya #53521 F201 lightweight diffs (front/rear)

----------

Here is a list of most of the loose/spare parts

Manual
- Item 58303 (Williams F1 BMW FW24)

Decals
- 58303 (Williams F1 BMW FW24) - unopened

Painted bodies
- Williams body painted as Tyrrell Camel/XP Parcel Express
- Williams body painted as BMW/HP/Allianz

Unpainted bodies
- 50969 F201 Body Parts Set (A) (complete with front/rear wings, decals, head)
- F201 body - Williams? with no front wing or head

Wings
- (2) spare wings, both have damage

Drive Train
- Stock prop shafts (front/rear)
- (4) aluminum wheel 6mm hexes (53569) - 1 has a broken set screw stuck in it
- (1) 55t spur
- (1) 52t spur
- (1) 23t pinion
- (1) 20t pinion
- lightweight counter gears
- (2) front diff cases
- (2) rear diff cases)
- (2) partially complete aluminum ball diffs (both need thrust bearing and spring)
- (1) diff ring bevel gear
- (3) plastic motor mounts

Chassis
- Plastic chassis bottom plate (used/scuffed on bottom)
- Plastic chassis top plate
- battery holders (left/right)

Suspension
- (1) front stabilizer plate
- (2) sets stock front lower a-arms
- (2) sets stock front upper a-arms
- (2) sets reinforced rear lower a-arm
- (2) sets stock rear lower a-arm
- (2) sets stock rear upper a-arm
- (2) front aluminum body shocks, complete (with extra shafts & pistons)
- (2) rear aluminum body shocks, complete (with extra shafts & pistons)
- F201 racing spring set (#53515)
- (3) uprights (not sure if they are front or rear)

Steering
- Servo saver parts (4 Futaba spline, 2 Sanwa spline)
- (5) servo mounts (1 for each servo ear)
- (3) swing arms (from servo to steering knuckles

Wheels/Tires
- (1) set of 4 kit wheels/tires (front & rear worn out)
- (1) set of 4 (A) compound wheels/tires with double inserts (front & rear)
- (1) set of 4 (A) compound wheels/tires with dual-stage inserts (front & rear)
- (2) front wheels/tires (B) compound
- (2) rear wheels (no tires)

Misc
- D RC Parts Bag - F201 (unopened)

----------

Basically I have at least 1 spare of all the major plastic parts, with these exceptions:
- Front steering knuckles/rear uprights (not sure which ones I've got)
- Rear shock top deck mount (don't have a spare)
- Front a-arm front upper reinforcement brace (don't have a spare)