R/C Tech Forums - View Single Post - Tekno RC EB48 Thread
View Single Post
Old 10-20-2013 | 06:07 PM
  #9561  
micrors4guy
Tech Elite
iTrader: (50)
 
Joined: Nov 2003
Posts: 3,595
From: Covington, La.
Default

Had a really good 1st outing with the eb48.2. I have not run any type of 8th scale in over 2 years and showed up with the car in 100% kit form.

I was able to qualify 2nd. Had some hard luck in the 1st main early on and had a magnet for a couple cars that were broken on the track and the corner marshals that were going to remove them. I was able to come from half a lap down on the 1st lap back up to 3rd. For the 2nd main i was able to pull out the win taking a 2nd overall. The podium was tekno 1 and 2.

overall the car was very stable and did not get upset at all. Everyone was commenting on how good the car looked going around the track.

only changes I made from 100% box stock was i dropped the rear camber link to the inside lower hole and move the hubs forward. 1mm shim in the front and 4mm in the rear of the hub.
micrors4guy is offline