[QUOTE=AzFittin;12625092]Hey there Tomas15, I know it has been several pages since you posted this but if you check out post 18524 http://www.rctech.net/forum/10409446-post18524.html you can see an easy way to center mount a stick pack. If you do this you will need to have a chassis brace ... you can make one on your own quite easily if you do not have a FT edition or the upgrades. If you have the time it is worth reading through the bazillion posts in this forum so you can see where the truck started and where many of the posters took it well before AE caught on and adopted the changes that were being done by owners. You will also find some very useful information along the way.

As for the center mount stick pack I found it to work well. After experimenting I decided a lighter truck was the way to go so I ended up converted to a shorty. I started with it in the middle but after some testing found that it worked best for me mounted forward and to the right as shown in post 28691 http://www.rctech.net/forum/11129060-post28691.html This puts the weight on the front end where it is needed and balances it left to right very well without adding extra weight.

Thanks for the help but I have actually not yet bought a sc10 4x4 I was just thinking of it being possible to run my electronics in this truck. But I'm not sure if should buy the sc10 4x4 ft bc I have an feeling that associated is working on a new vehicle. So think it would be smarter to wait