Originally Posted by
Linguster
I went to look in my boxes to find the dremelled plate to take a photo. I guess it went with one of the cars that I have sold. I took a one of the tools in the box that are 3 mm wide and put a pencil mark in the plate and dremelled a 4mm wide and 2 mm deep concave mark in the plate. I did not need to raise the servo mount in the way you have done.
Thank's for the tip.. I did not wanted to cut the extension plate but had no choice. Guess if you want to use the X-Ray servo saver, you have to cut the plate a little...No wonder they went with a different design on the servo holder with the new car...It works great now.
cheers,