Originally Posted by
fq06
I've never bothered with the screws but surprised they are not a good fit. Maybe Tekin never thought anyone would ever try using them
To spend the big $$, but said to be the best, Kyosho zeal tape.
Or the clear 3m tape.
I use shoegoo, it will not come off till you want it to and it leaves no residue. I've ran my RX8 in multiple chassis for well over a year with shoegoo and have not had an issue.
I made the mistake of completely covering the bottom of an RX8 with the 3M Outdoor (heavy duty) double sided tape! I thought I was going to break the esc tray on a MBX6E trying to get the RX8 off. I ended up using a hair dryer and warming up the tape enough so it would come off. I got it loose, but it made a mess with all that warm glue from the tape.
Now, I just cut about 1/4" to 3/8" wide strips and go along the outside edges of the esc. I've never had one fall off!
Just make sure you're cleaning the bottom of the esc, and whatever you're sticking the esc to, very well. I use either rubbing alcohol or denatured alcohol to clean the bottom of the esc and esc tray.