R/C Tech Forums - View Single Post - TLR 22SCT Thread (Check First Page for FAQ & INFO)

10-07-2013, 04:35 AM

#8261

Manatarms25

Tech Elite

iTrader: (223)

Join Date: Jul 2009

Location: Cadillac, MI

Posts: 3,272

Trader Rating: 223 (100%+)

Quote:

Originally Posted by AndrewTom

in all honesty, you really should try this set up:
http://www.petitrc.com/setup/losi/se..._OCRC20121224/

it does wonders to the kit, everywhere.

EDIT: there are a few changes to that set up, one of which I know is that on the rear hub is 3mm, not 2mm.
and I think casper is running the Low Frequency Yellow rear spring. But, the listed buggy yellow are fine.
off the top my head you'll want/need:
Associated (molded) or TLR (machined) 12mm piston sets, if you dont want to glue and drill the stock pistons.
Truck green front spring
Buggy yellow rear spring
CR battery foams

I recommend the new 22 2.0 buggy steering rack, takes away all the goofy bumpsteer the car has stock.

Andrew Thanks, I will try that set up and hope to get some track time before our trophy race on the 26th.

I do have the new 2.0 steering rack and the machined shock parts already. Just have not installed them.

I alot of set ups mention the CR battery foam. I am assuming its the foam block from the older CR model XXX's ? What is the length of that battery foam if a guy just was to order a avid one etc.
Thanks again! JJ

Reply