Originally Posted by
jgonz
What is a good gearing combo for a Reedy 6.5?
also what is a good ride height?
If I were you I would start with a 18 or 19 pinion. I currently run a 20 with a 9.5 tekin. Just watch your temp. If you push the car and your temps are cool go up on your pinion a toot or 2. What I did is i checked temps after 3 mins of hard driving. I felt it was cool so I drove it for 3 more mins and I felt the temp again. Motor was hot but not to hot so I decided to stay with 20 for now. I am running a ride height of 22mm all the way around. I run - 1 chamber all the way around, 0 degree of toe in the front and 3degree of toe in the rear.