Ok so I'm setting up a new to me B4.2 and have a question about chassis weighting. For this build I'm putting the ESC in the tray as I didn't like how things were going together using a shelf with the RX in the tray. Obviously I'm running a shorty pack and I did the mod where you use a rear toe block to make a hard stop for the battery (yea I get it, it isn't ROAR legal). So the RX will be on the right side of the chassis with my PT and the ESC power switch and the only thing on the left side of the chassis are the capacitors from the ESC (Viper VTX10 BE). The PT is 5g, the RX is 8g and I don't know the switch or the caps. I am using the AVID motor centering kit.

So the question is: should I add weight on the left side of the chassis to offset the RX, PT and switch?