Ok, for everyone wondering about droop, shock shaft length, and limitiers, here are my findings.

.030" limiters = .76mm

Front:
-bottom e-clip to eyelet threads = 32mm
-exposed shock shaft length with no limiters to eyelet threads = 22.25mm
-exposed shock shaft length with no limiters with shock eyelet screwed all the way in hand tight = 21.25mm

Rear:
-bottom e-clip to eyelet threads = 38.5mm
-exposed shock shaft length with no limiters to eyelet threads = 29mm
-exposed shock shaft length with no limiters with shock eyelet screwed all the way in hand tight = 27.75mm

On the eyelets I turned them pretty hard. They're definitely as far as they will go.
These measurements were on brand new in package big bore shocks.
These are my findings, take them with a grain of salt, miles my vary, etc.