Originally Posted by
22Racer
Mine is at 1.5 turns in from flush lsn, 2 turns in from flush Hsn. I did not measure the idle gap but I started at around .7mm.
Rex
Great thanks for the reply. Break in process so far so good. I was only able to get 3 tanks through it before I had to call it a day. Mine was pretty tight and took a good amount of heat to get it fired up.
Once I did it ran no problem. One thing I noticed is that the needles are ultra responsive. You turn them and do what they are supposed to do.
So far so good. How many tanks are you guys putting through it before putting on a solid tune.
Thanks again.