Hey Guys, struggling a bit trying to find an outdoor setup for the truck that will keep the rear end under control, looking for a setup or some advice. The tracks I'm racing at are pretty hard packed but not blue grooved during club races so a top layer of dust will form, nothing loamy/sandy though.

Truck has plenty of steering, just way to loose. Started with the stock setup and ended up with yellow springs up front and short/lower camber link, whites in the back, no rear sway bar and the 8mm mod. This has made the truck a bit better but still not able to put the power down without the rear kicking around in high and low speed turns. If i try to stiffen up the front more via springs or shock locations it causes the truck to be inconsistent over the bumps and in the air. I also tried the overdrive pulley up front and saw no improvement so i went back to normal.

Any help is appreciated,

Blake