GP40X

iTrader: (10)

For Sale XRAY T2R Pro set up for VTA.
This car is perfect for VTA or USGT.
Has a T2'009 carbon fiber top deck, the T2'008/T2'009/T2R Pro 309860 lipo balancing chassis weights Lipo conversion kit, the 300944 T2'009 38 tooth rubber spec conversion set, 303033 T2 Alu Quick Roll-Center Holder 4.9mm - L1+L2 (both front and rear), T2’009 steel turnbuckles, T3-12 shocks with the T2R Pro progressive springs, a Spec-R 38 tooth gear diff and 38 tooth front spool installed 1.9 drive ratio, an XRAY 96 tooth 64 pitch spur gear, 6° front caster blocks, T2 007 2 hole front arms, and rear 0° uprights installed.
Car comes with a McAllister 69 Mustang VTA practice body with driver.
Chassis will come with an XRAY 300943 T2'009 - rubber-spec conversion set - forward motor position (has different belts and upper front and rear decks to allow you to move the motor to the forward position for more on power steering ).
This is a roller with no electronics.
***SOLD***
New in bag parts:

McAllister 69 Mustang VTA body
301023 Impact Absorbing Front Bumper
302252 Composite Steering block
302663 Composite Ball Joint 4.9mm - Open - V2 (8)
302664 Composite Ball Joint 4.9mm Unidirectional - Open (4)
303454 Ball Joint 4.9mm - Open (4)
305340 Drive Axle
305862 92T 64 pitch spur gear
306210 T2R Pro Servo Mounts
307455 4.9 pivot balls
308035 Composite Pistons - Adjustable + Non-Adjustable (Set 2+6)
308080 Shock Absorber Membranes (4) (bladders)
308316 Shock Ball Joint - Open (4)
965019 E-Clip 1.9 (10)

Used/opened parts:
T3 ball diff
Complete T2/3 Front Sway Bar Kit
1 pair 52mm Hudy T3 CVD with light weight front axles
1 50mm T2’007 CVD with standard axle.
4 302044 Lower Suspension Holders (2+2+2) (the extra ones that came with the car still on the tree)
2 each 1L & 1R Medium 1°rear uprights
XRAY 96 & 100 tooth 64 pitch spur gears
Machined 98 tooth 64 pitch spur gear
2 used blades and 2 new blades (3.5)
1 T2 007 2 hole front arm (you will need this to use the sway bar kit)
1 T2 009 1 hole front arm