R/C Tech Forums - View Single Post - Tekno SCT410 Thread
View Single Post
Old 08-25-2013 | 01:51 PM
  #14000  
honda237's Avatar
honda237
Tech Addict
iTrader: (18)
 
Joined: Sep 2011
Posts: 562
Default

Originally Posted by fq06
As far as landing on the roof when you cut throttle in the air, I come from nitro as well and a nitro motor with a clutch that let's the drive train freewheel is a lot different than a brushless.

This is one of the reasons I went with the RX8. Push. Best friend for a person coming from nitro as it keeps a little bit or a lot bit of throttle (depending on how you set it) on when you release the trigger. Granted, with brushless you don't want to fully release the throttle but if you do, push will help keep you horizontal.
Also helps it feel like nitro rolling through a turn instead of having motor braking. Touch the brake and push is disabled.
Thanks, didnt realize about the push on the rx8, this will be my first tekin so alot to learn coming from castle. I also run a sc10ft, plus about a decade with electrics. The scte was just super unbalanced, that's why they redid the scte and came out with the scte 2.0.
honda237 is offline