R/C Tech Forums - View Single Post - Tekno SCT410 Thread
View Single Post
Old 08-25-2013, 11:15 AM
  #13983  
fq06
Tech Champion
iTrader: (12)
 
fq06's Avatar
 
Join Date: Dec 2011
Location: Los Angeles
Posts: 5,646
Trader Rating: 12 (100%+)
Default

Originally Posted by jamr1130
My feelings exactly. My 1/8 conversion felt more stable and I could run aggressive. It was just a little short on tight turning. I know this truck can sling around the track. I've seen the videos (local SoCal races) I'm sticking with it and will give this truck a chance because I just bought it. Just gotta get the right setup. I've got green/front and yellow/rear springs on order. Till they arrive I went up in oil from 37.2 frt/ 32.5 rr to 40 frt/ 35 rr because stock springs seem too soft. The hunt continues.
Please share once you find it and I'll do the same if I get there first
I'm running Durango white/grey in the front and that felt good. HB grey in the rear felt too stiff and bouncy but I think thicker shock oil will solve that. Tried Kuya's Kyo orange and those were also too stiff for the 35/30 that I was running.

I have a few things to try including roll center changes and lower ride height that I think will get me to my happy place.
fq06 is offline