Hey guys this is my first post on here.This is my current setup however my track just did a complete rebuild so im sure it will change.

Electronics
-mamba max pro esc
-Novak ballistic 4.5 w/heat sink and milled motor pate.+16 degrees timing.0% drage brake
-savox 1258tg
-spektum DX3S and sr301 receiver.

Suspension
-Bypass1 pistons
-yellow front springs/red rear
-yellow front sway bar/orange rear
-emulsion style
-all 4 on the middle hole/all outside on the arms
-32.5 front fluid/40 rear
-exotek rear hubs 6mm on hub stud/5mm inner stud
-rpm arms all around
-ride height 25mm front/26mm rear
- -2 camber all around
- +2 toe

Drive train
-60k in the front/5k in the rear
-Exotek locked front
-20t rear/19t front
-VTS slipper
-12t pinion
-aluminium pulleys

Battery
Trakpower 6000mah 80c 2s

Tires
Proline suburbs super softs w/aka +3mm offset wheels

Body
Proline tundra

Future upgrades
-boca bearing set
-possibly center ball diff
-4 postal scales and a 55/45 balance.I know this truck could use the weight.
-makita electric drill lol

This setup pulls like hell and great in turns.When i add the weight i will make the ride height considerably higher.I'll add a pic as soon as i find out how to.