R/C Tech Forums - View Single Post - Battery help for Tamiya
View Single Post
Old 08-19-2013, 06:47 PM
  #4  
terry.sc
Tech Master
 
Join Date: Aug 2008
Location: Stockport, UK
Posts: 1,024
Default

the TA05MS uses side by side packs as well as stick packs. Take off the stick battery side mounts and a brick lipo will drop right in there with a couple of strips of plastic glued on the bottom of the lipo to hold it in place in the battery slots. Unscrew the tops of the battery strap posts enough to lift the strap up to clear the pack, or just tape the pack in with fibreglass tape.
terry.sc is offline